Triethylene Glycol Industrial Uses: Benefits & Properties
Triethylene Glycol for Industrial Uses: Benefits & Properties
Triethylene glycol (TEG) is a clear, viscous glycol that industries value for a short list of reliable properties: it attracts water, resists evaporation, dissolves many materials, and holds up under heat. Understanding these properties makes it easier to choose TEG for the right job and to specify the right grade.
Because each property links directly to performance, sourcing Triethylene Glycol from a dependable supplier helps manufacturers keep results consistent. Chemical Bull supplies Triethylene Glycol in bulk quantities with competitive pricing for industrial buyers.
Chemical Identity
|
Property |
Detail |
|
CAS Number |
112-27-6 |
|
Chemical Name |
2,2'-[Ethane-1,2-diylbis(oxy)]diethanol |
|
Chemical Formula |
C₆H₁₄O₄ |
|
Molar Mass |
150.17 g/mol |
|
Family |
Ethylene glycol series, between diethylene and tetraethylene glycol |
Key Physical Properties of Triethylene Glycol
|
Property |
Typical Value (approximate) |
Why It Matters |
|
Appearance |
Clear, colorless, viscous liquid |
Suits clear and light-colored formulations |
|
Boiling Point |
About 285°C |
Low loss during heating and processing |
|
Freezing Point |
About -7°C |
Stays liquid in most working conditions |
|
Density |
About 1.12 g/mL at 20°C |
Heavier than water, useful for handling and blending calculations |
|
Viscosity |
About 37 mPa·s at 25°C |
Thicker than lighter glycols, which affects pumping and mixing |
|
Vapor Pressure |
Very low at room temperature |
Minimal evaporation and low vapor loss |
|
Flash Point |
Well above 150°C |
Safer to handle than many volatile solvents |
|
Solubility |
Fully miscible with water and many organic solvents |
Easy to blend into most systems |
|
Odor |
Mild |
Suitable where strong smells are unwanted |
Key Chemical Properties of Triethylene Glycol
- Hygroscopic Nature: Two hydroxyl groups and ether linkages let it absorb water readily from air and gas streams.
- Good Solvency: It dissolves many resins, dyes, and polar organic compounds.
- Reactive Hydroxyl Groups: It can form esters and ethers, which makes it a useful building block for resins, plasticizers, and glycol derivatives.
- Thermal Stability: It tolerates repeated heating, although it begins to degrade at high temperatures, so process limits should be respected.
- Chemical Stability: It is stable under normal storage but reacts with strong oxidizers and strong acids.
- Low Toxicity Profile: Its acute toxicity is low compared with many solvents, though it is not meant for ingestion.
Benefits of Triethylene Glycol in Industrial Use
|
Property |
Resulting Benefit |
|
High Boiling Point and Low Vapor Pressure |
Low losses and stable performance in hot processes |
|
Strong Water Affinity |
Effective moisture control and humectant action |
|
Good Solvency |
Dissolves actives and resins in coatings, inks, and dyes |
|
Reactive Hydroxyl Groups |
Flexible chemical intermediate for esters and ethers |
|
Mild Odor and Light Color |
Fits clean-looking and low-odor products |
|
Thermal Stability |
Reusable in closed-loop systems with proper control |
How Properties Translate to Applications
- Gas Dehydration: Water affinity, high boiling point, and thermal stability make TEG a standard liquid desiccant.
- Plasticizers: Reactive hydroxyl groups and low volatility help produce flexible, durable plasticizers.
- Polyester and Polyurethane Resins: Their difunctional structure supports chain building in polyols and resins.
- Solvents for Inks and Dyes: Slow evaporation and good solvency keep inks and dyes workable.
- Humectants: Moisture retention is useful in tobacco and select industrial products.
- Hydraulic and Brake Fluids: Thermal stability and low volatility suit demanding fluid formulations.
- Chemical Intermediate: A feedstock for glycol ethers, esters, and specialty chemicals.
Triethylene Glycol vs. Other Glycols: Property Comparison
|
Property |
Monoethylene Glycol |
Diethylene Glycol |
Triethylene Glycol |
|
Boiling Point |
Lowest of the three |
Mid-range |
Highest of the three |
|
Volatility |
Higher |
Moderate |
Lowest |
|
Viscosity |
Lowest |
Moderate |
Highest |
|
Water Affinity |
Strong |
Strong |
Strong, with low vapor loss |
|
Typical Role |
Antifreeze, polyester |
Resins, solvents |
Dehydration, plasticizers, specialty solvents |
Typical Specification Parameters to Look For
- Purity (Assay): High purity, typically around 99 percent or higher for industrial grades.
- Water Content: Low moisture, since TEG absorbs water and quality varies with it.
- Color (APHA): A low color number indicates a clean product.
- Acidity: Low acidity, since rising acidity can signal degradation and can cause corrosion.
- Density and Refractive Index: Useful quick checks for identity and consistency.
- Diethylene and Tetraethylene Glycol Content: Controlled levels of neighboring glycols keep behavior predictable.
How Key Properties Are Tested
Knowing how each property is measured helps you read a Certificate of Analysis with confidence:
- Assay: Usually measured by gas chromatography, which also shows neighboring glycols.
- Water Content: Measured by Karl Fischer titration, the standard method for low moisture levels.
- Color: Reported on the APHA scale by comparing the sample against reference standards.
- Acidity: Measured by titration and reported as acid number or acidity as acetic acid.
- Density and Refractive Index: Quick instrument checks that confirm identity and batch consistency.
Grade Selection Guidance
|
Application |
What to Prioritize |
|
Dehydration and drying |
Low water, low acidity, and stable color |
|
Plasticizers and resins |
High purity and low neighboring glycol content |
|
Inks and dyes |
Low color and mild odor |
|
Fluids and lubricants |
Tight limits on water and acidity |
What to Check When Sourcing Triethylene Glycol
- Specification Match: Compare the supplier's data against the parameters above.
- Batch Documentation: Request a Certificate of Analysis (CoA) and Safety Data Sheet (SDS) for every shipment.
- Packaging: Confirm drums, IBC totes, or bulk tanker delivery with moisture protection.
- Reliable Supply: Confirm lead times that fit your production schedule.
Storage and Handling Considerations
Because TEG is hygroscopic, store it in tightly sealed containers with minimal air space, and keep transfer lines closed when possible. It is combustible with a high flash point, so keep it away from ignition sources and strong oxidizers. Use gloves and eye protection, and do not ingest it. Always review the current Safety Data Sheet.
Common Buyer Mistakes to Avoid
- Ignoring Water Content: Moisture changes viscosity, performance, and shelf life.
- Overlooking Acidity: Acidic or degraded glycol can corrode equipment.
- Skipping Batch Documentation: A generic data sheet does not confirm the delivered batch meets your specification.
- Poor Storage: Open or leaking containers let the glycol absorb moisture.
Frequently Asked Questions
-
What are the main properties of triethylene glycol?
It is a clear, viscous, hygroscopic liquid with a high boiling point, low volatility, good solvency, and mild odor. -
Why is triethylene glycol hygroscopic?
Its hydroxyl groups and ether linkages attract and hold water molecules, so it absorbs moisture from air. -
What is the boiling point of triethylene glycol?
It is about 285°C, which keeps evaporation losses low in hot processes. -
What is the CAS number of triethylene glycol?
The CAS number is 112-27-6. -
Does Chemical Bull supply triethylene glycol in bulk?
Yes, Chemical Bull supplies Triethylene Glycol in bulk quantities with competitive pricing.
Conclusion
Triethylene glycol combines water affinity, high boiling point, good solvency, and reactive hydroxyl groups, which is why it serves so many industrial roles. Matching its properties to your application and sourcing it from a supplier with consistent quality and clear documentation helps manufacturers get dependable performance every time.
